Вс июн 25, 2017 18:09:04
Вс июн 25, 2017 21:22:35
Ср июл 19, 2017 18:24:27
Пн сен 04, 2017 05:32:18
Вс сен 24, 2017 07:19:55
Пн окт 23, 2017 17:48:19
RA0QK писал(а):Не сердитесь,sng61, в режиме Probe x10 с компенсацией такая же картина,без искажений?
Ср фев 14, 2018 20:09:39
2018/1/27 5.1.3.17R1 1. Fixed bug: Sometimes Auto setup fails on probe compensation output
2017/11/20 5.1.3.17 1. Fixed bug: Corrected under-compensation from probe compensation waveform on 100 mV/div ranges
2. Fixed bug: FFT horizontal frequency div is incorrect. The wrong sequence is shown: 5 Hz, 2 Hz, 1 Hz, 2 Hz, 5 Hz, 100 mHz, 200 mHz
3. Optimized translation for German and English menus and pop-up messages
4. Fixed bug: The scope does not save the‘limit range’of slope trigger while powered off
5. Fixed bug: The waveform disappears from the Zoom window at the edge of screen with the timebase set to500ns/div.
6. Fixed bug: There is an issue with the Y cursor offset/scaling, probe with x10 setting. The Y1/Y2 cursor values do not match the Y voltage division/offset of the selected input channel
7. Fixed bug: Track cursor source set to track the waveform in the zoom window, but it tracks main window
Вс авг 12, 2018 12:29:54
Пт окт 12, 2018 23:17:03
Сб окт 13, 2018 19:46:28
Вс июл 21, 2019 06:04:18
Ср июл 31, 2019 21:17:47
Ср июл 31, 2019 22:27:40
Чт авг 01, 2019 03:50:48
Чт авг 01, 2019 19:58:54
Чт авг 01, 2019 20:22:13
Вы, или крестик снимите, или трусы наденьте...
Пт авг 02, 2019 21:37:03
Вт авг 06, 2019 03:59:16
Вт авг 06, 2019 07:20:36
Вс авг 11, 2019 23:09:43