Вс июл 12, 2015 16:41:26
Once I put it together the only thing that kind of worked was the temperature sensor. once I set the time up it wont change at all. For the rest it's a very nice soldering diy kit. Please help!!
I just assembled the version without temperature and light sensor and had the same problem. It turns out the DS1302 clock chip not only doesn\'t need capacitors on the crystal, they actually CAUSE this problem. Snip off the two ceramic caps by the crystal (schematic says they\\\'re C4/5 on your model) and it\\\'ll work!
Вс июл 12, 2015 16:47:01
Вс июл 12, 2015 16:49:15
Вс июл 12, 2015 18:49:53
Вс июл 12, 2015 19:40:17
Вс июл 12, 2015 19:44:53
DoubleDragon писал(а):убрать полностью? А что же вместо них будет (если не подбирать)
Вс июл 12, 2015 20:50:33
Вс июл 12, 2015 20:54:01
Вс июл 12, 2015 20:57:17
Вс июл 12, 2015 21:13:11
Вс июл 12, 2015 21:26:27
Вс июл 12, 2015 21:48:15
Вс июл 12, 2015 22:12:59
Set hour: Click the function keys (hour digital tube and two points flashing), press the plus button to modify;Set minute: Press the function key (minute digital tube and two points flashing), press the plus button to modify;Set alarm hour: Press the function key (hour digital tube flashing, two points are not blinking), press the plus button to modify the alarm hour;Set alarm minute: Press the function key (minute digital tube flashing, two points are not blinking), press the plus button to modify the alarm minute;Set the alarm to ON/OFF: Press the function key (hour, minute and two points does not move), press the plus button, indicator point lights (Alarm On), indicating point off (alarm off);Set NowTime: Press the function key (hour tube blinking, two points not blinking), press the plus button to modify the start time (if adjusted to 8, means beginning at 8:00 am); then Press the function key again (minute tube is blinking two points not blinking), press the plus button to modify the end of the alarm time (if adjusted to 22, that is, 8:00 am to 22:00 pm has the NowTime, does not affect sleep); press the function key to exit. Set finish
Пн июл 13, 2015 08:20:49
Пн июл 13, 2015 09:20:57
Пн июл 13, 2015 10:43:09
Сб июл 18, 2015 10:46:09
убрать полностью? А что же вместо них будет (если не подбирать)?
Сб июл 18, 2015 18:21:03
Сб июл 18, 2015 19:09:53
Вс июл 19, 2015 15:53:06
Но, покупая конструктор, и собирая вторую схемку в жизни, не предполагал, что столкнусь с такими проблемами.