Сб янв 10, 2009 00:31:19
Сб янв 10, 2009 11:15:09
Пн янв 12, 2009 22:55:36
Пн янв 12, 2009 23:07:52
Вт янв 13, 2009 00:26:09
Вт янв 13, 2009 10:09:32
Вт янв 13, 2009 10:28:06
Вт янв 13, 2009 13:49:28
#pragma interrupt_handler Crossing_interrupt:2
#pragma interrupt_handler IR_interrupt:4
#pragma interrupt_handler Degre_interrupt:5
#pragma interrupt_handler Ticker_interrupt:7
/* External Interrupt Request 1 */
#define SIG_INTERRUPT1 _VECTOR(2)
/* Timer/Counter1 Compare Match */
#define SIG_OUTPUT_COMPARE1A _VECTOR(4)
/* Timer/Counter1 Overflow */
#define SIG_OVERFLOW1 _VECTOR(5)
/* UART, Rx Complete */
#define SIG_UART_RECV _VECTOR(7)
Вт янв 13, 2009 14:07:08
Вт янв 13, 2009 14:55:28
Вт янв 13, 2009 15:06:07
Base on AVR AT90S2313 I saw rapidly that my MCU must be clocked very fast to make all the calculations needed to light the leds at the right place. The speed is at 16Mhz, 4 times faster than Atmel's specifications. It's working without any problems.
Вт янв 13, 2009 15:08:28
Вт янв 13, 2009 15:31:11
Вт янв 13, 2009 15:47:39
Вт янв 13, 2009 16:09:33
Вт янв 13, 2009 19:01:16
Вт янв 13, 2009 23:22:53
Ср янв 14, 2009 11:20:08
Чт янв 15, 2009 11:54:41
Чт янв 15, 2009 13:59:35