Пт ноя 04, 2022 16:54:48
System wide configuration file is "C:\ARDUINO\hardware\tools\avr/etc/avrdude.conf"
Using Port : COM4
Using Programmer : arduino
Overriding Baud Rate : 19200
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x66
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x18
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x18
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x1e
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xe6
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x80
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x98
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x80
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xe6
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x86
Пт ноя 04, 2022 17:08:13
Пт ноя 04, 2022 17:33:07
Пт ноя 04, 2022 17:48:21
Пт ноя 04, 2022 18:01:17
Пт ноя 04, 2022 18:03:41
Пт ноя 04, 2022 18:07:31
Пт ноя 04, 2022 18:11:18
Пт ноя 04, 2022 18:14:47
Пт ноя 04, 2022 18:18:55
Пт ноя 04, 2022 18:20:00
Пт ноя 04, 2022 18:26:51
System wide configuration file is "C:\Users\storyteller\AppData\Local\Arduino15\packages\MiniCore\hardware\avr\2.1.3/avrdude.conf"
Using Port : COM4
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x58
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x58
Пт ноя 04, 2022 18:29:05
Пт ноя 04, 2022 18:30:05
Пт ноя 04, 2022 18:32:20
Пт ноя 04, 2022 18:37:13
Пт ноя 04, 2022 18:39:42
Пт ноя 04, 2022 18:42:46
Пт ноя 04, 2022 18:44:26
Пт ноя 04, 2022 18:45:11